How to clean and care for the epoxy coat on your NFTEngraving.

Cleaning the epoxy cpat on your NFTEngraving requires careful attention to maintain its appearance and integrity. Here are the recommended steps to clean tabletop epoxy:

1. Gather the necessary supplies: You will need mild dish soap, warm water, a soft cloth or sponge, a non-abrasive cleaner (if needed), and a microfiber cloth for drying.

2. Prepare the cleaning solution: Mix a small amount of mild dish soap with warm water in a bucket or basin. Avoid using harsh chemicals or abrasive cleaners, as they can damage the epoxy surface.

3. Wipe away loose debris: Use a soft cloth or sponge to gently wipe away any loose debris, such as crumbs or dust, from the tabletop epoxy. Be careful not to scratch the surface.

4. Clean with the soapy water solution: Dip the cloth or sponge into the soapy water solution and wring out any excess liquid. Gently wipe the tabletop epoxy in a circular motion, removing any stains or spills. For stubborn stains, you may need to apply a bit more pressure, but avoid excessive scrubbing.

5. Rinse with clean water: After cleaning, rinse the cloth or sponge with clean water and remove any soap residue from the epoxy surface. Wipe the tabletop with the damp cloth to ensure all soap is removed.

6. Dry the epoxy surface: Use a clean microfiber cloth to thoroughly dry the tabletop epoxy. This will help prevent water spots or streaks from forming.

7. Address stubborn stains (if necessary): If you encounter stubborn stains that the soapy water solution couldn't remove, you may need to use a non-abrasive cleaner specifically designed for epoxy surfaces. Follow the instructions on the cleaner's packaging and test it on a small, inconspicuous area first to ensure it doesn't damage the epoxy.

Regular cleaning and gentle care will help preserve the beauty and longevity of your NFTEngraving.